FAQ
all
PRODUCT FAQ
LOGISTICS FAQ

all

What is included in a complete set of sand making equipment?

Hello, I want to open a sand and gravel field, which is mainly used for the production of artificial sand. I would like to ask you about your sand making equipment. What equipment do you have to provide transportation and installation services?The dual-machine cooperation of the tire mobile sand production line, one equipped with a feeder, a jaw crusher, and one equipped with a sand making machine and a sieving machine, to cooperate directly with local operationsIt can be seen that coarse sand crushing equipment, fine crushing equipment, sieving equipment, sand blasting equipment, sand washing equipment and connection equipment in the intermediate link are needed in the entire set of artificial machined sand. There are fixed and mobile operations, so what mechanical equipment does the complete set of sand making equipment include? Below we introduce one by one.Recently, the number of users of the entire set of equipment for consulting the sand production line has been increasing. The complete set of equipment for the machined sand includes crushing equipment and sand making equipment. The specific introduction is as follows:Jaw crusher is used for coarse crushing of stone. Raw material is crushed to make sand. This equipment is one of the earlier crushing processing equipment, which has a large crushing ratio, large processing capacity and high production capacity.Dingbo's new type of sand making machine, hvi type sand making machine is our new model, with larger output, more intelligent, large throughput, simple and reasonable structure, easy operation and maintenance, and strong controllability.Cone crusher and cone crusher are used for secondary fine crushing. The internal structure of the whole machine is relatively compact. The fully automatic control system provides safe and reliable operation, high stability, high accuracy, and good energy saving and environmental protection effects.Multi-layer vibrating sand sieving machine, the large material sieved from the upper layer is usually pulverized again. The sieved from the middle layer can be used for stones or sand. The sieved sand from the bottom layer depends on customer requirements. The size of the holes in the sieve is also different.The following introduces the site of a complete sand production line for your referenceCustomer project 1. The sand production line in Kyrgyzstan is assembled by a vibrating screen, a sand making machine, a cone crusher, a jaw crusher, and a reverse crusher, and is connected by a conveyor.The customer's second item is that the customer's raw material itself is thin and can be directly sent to the sand making machine for sand making. After sanding, it is sent to the vibrating screen for screening by the belt conveyor. The vibrating screen is thinner and passes through the screen After the separation, the larger particles are returned to the sand making machine through the belt conveyor for sand making again. The finished product sand is directly sent to the finished product.Customer project 3. This line is a production line purchased by foreign customers. The raw materials are sent to the silo via an excavator and sent to a jaw crusher via a belt conveyor for crushing. The crushed sand and gravel are then sent to the vibrating screen via a belt conveyor. Sieving, sieving the sand and stones, the sand is sent directly to the sand washer for cleaning. The other part can be used to make sand to the sand making machine for sand blasting. After being broken, it is discharged from the bottom through a belt conveyor and sent to a vibrating screen for screening. Generally, after three cycles, all the sand can be broken into sand. . The sand from the sand washer is finished sand.How much investment is needed for a complete set of sand making equipmentHow much investment is required for a complete set of sand making equipment? This is a topic that the users are more concerned about. In fact, the equipment is not quoted according to the entire set, but according to the selected equipment manufacturer, the size of the equipment, the material used in the equipment, etc. Only after you have a specific equipment configuration plan can you get the details of the quotation accurately. Here are professional and technical personnel to design a better package configuration plan tailored for you based on your production needs, and give you specific preferential quotations.Dingbo Machine is a professional sand-making equipment manufacturer with a professional R & D technical team and many years of rich manufacturing experience. The sand-making equipment produced has excellent quality and good performance, and can meet the needs of large, medium and small production lines of major sand-making manufacturers. You can also customize a better configuration solution according to your needs. If you have any requirements, please contact us. Welcome to come to our factory for a site inspection!The following introduces the site of a complete sand production line for your referenceCustomer project 1. The sand production line in Kyrgyzstan is assembled by a vibrating screen, a sand making machine, a cone crusher, a jaw crusher, and a reverse crusher, and is connected by a conveyor.The customer's second item is that the customer's raw material itself is thin and can be directly sent to the sand making machine for sand making. After sanding, it is sent to the vibrating screen for screening by the belt conveyor. The vibrating screen is thinner and passes through the screen. After the separation, the larger particles are returned to the sand making machine through the belt conveyor for sand making again. The finished product sand is directly sent to the finished product.Customer project 3. This line is a production line purchased by foreign customers. The raw materials are sent to the silo via an excavator and sent to a jaw crusher via a belt conveyor for crushing. The crushed sand and gravel are then sent to the vibrating screen via a belt conveyor. Sieving, sieving the sand and stones, the sand is sent directly to the sand washer for cleaning. The other part can be used to make sand to the sand making machine for sand blasting. After being broken, it is discharged from the bottom through a belt conveyor and sent to a vibrating screen for screening. Generally, after three cycles, all the sand can be broken into sand. . The sand from the sand washer is finished sand.How much investment is needed for a complete set of sand making equipmentHow much investment is required for a complete set of sand making equipment? This is a topic that the users are more concerned about. In fact, the equipment is not quoted according to the entire set, but according to the selected equipment manufacturer, the size of the equipment, the material used in the equipment, etc. Only after you have a specific equipment configuration plan can you get the details of the quotation accurately. Here are professional and technical personnel to design a better package configuration plan tailored for you based on your production needs, and give you specific preferential quotations.Dingbo Machine is a professional sand-making equipment manufacturer with a professional R & D technical team and many years of rich manufacturing experience. The sand-making equipment produced has excellent quality and good performance, and can meet the needs of large, medium and small production lines of major sand-making manufacturers. You can also customize a better configuration solution according to your needs. If you have any requirements, please contact us. Welcome to come to our factory for a site inspection!

Technical parameters and production configuration of PE-750 × 1060 jaw crusher

PE-750 × 1060 jaw crusher is a type of crusher often used in crushing work. Its working performance can fully meet the small and medium-scale crushing work, so it is also a common model. Many users will choose PE-750 × 1060 Type rock breaker to complete the crushing work. This article will tell you the working parameters and configuration of the PE-750 × 1060 jaw crusher in detail for your reference. 1. Technical parameters of PE-750 × 1060 Jaw CrusherThe technical parameters of PE-750 × 1060 jaw crusher include:1. Feeding port size: 750 × 1060mm2. Maximum feed size: 630mm3. Adjusting range of discharge port: 80-140mm4. Processing capacity: 110-320t / h5. Eccentric shaft speed: 250r / min6. Motor power: 110kwSecond, PE-750 × 1060 jaw crusher production configuration When using the PE-750 × 1060 jaw crusher for crushing production, the entire crushing production process can be completed with the assistance of auxiliary equipment.1. Vibrating feeder: The vibrating feeder can screen out the mixed gravel and debris in the material, and send the bulk material to the PE-750 × 1060 jaw crusher for crushing2.Belt conveyor: Different equipment of the crushing production line need to be connected through a belt conveyor in order to connect different production links for continuous work;3. Vibrating screen: The materials crushed by the crusher are screened through three layers of the vibrating screen to divide the materials into finished products of different sizes;4. PE-750 × 1060 jaw crusher: The jaw crusher is the protagonist in crushing production, and the rough crushing of the material is mainly done by it.If your crushing work does not require high granularity, the above configuration can fully meet your production. If you want to process finished materials with smaller particle size, the above configuration can be used in combination with secondary crushing equipment such as cone crushing and impact crushing. Realize the fine crushing of materials, but it is recommended that you use the secondary crushing equipment of the same manufacturer, otherwise there will be a running-in period between the equipment, which affects the crushing production effect and economic benefits.

Mr. Zhang: I would like to inquire about 10,000 tons of cobblestone sand making and washing line pro

Cobblestone: Hard, green, natural, non-radiation, wide resources, simple sand making process, processed sand stone material is of high quality, good quality and more durable, so it has become one of the main sand making materials in sand stone factories, widely used in high speed Highways, water conservancy, hydropower, railways, bridges, airport runways and other projects meet their demand standards for high-quality sand and better guarantee the quality of the project.No, manufacturers have been asking users for production line equipment for cobblestone sand making and sand washing. A daily output of 10,000 tons is required. Commonly used cobblestone sand making equipment includes: jaw crusher, impact crusher, cone crusher, roller crusher, etc. The specific equipment configuration.

Mr. Bai: I would like to inquire about how to configure the 500-ton / day calcite milling production

Calcite is a calcium carbonate raw material widely distributed in nature. Its grinding powder has low production cost and high industrial processing value. The finished fine powder is widely used in various fields such as glass, ceramics, construction, chemical industry, and light industry. The supply of calcite powder from domestic counterparts is still in the "supply in short supply" stage, and the demand for calcite powder from other regions continues to expand, so the investment "money" is particularly impressive.With the "status" of calcite powder gradually increasing, more and more friends are investing in the milling industry. This is not always the case when a friend asks: how to configure 500 tons of calcite milling production line equipment? What is the price investment? Ding Bo Machine, a manufacturer of milling equipment with considerable experience in the industry, hereby invited Mr. Yang Quanzhong, a powder equipment engineer, to answer questions for everyone.

Concerned about garbage classification, and this industry

The environmental protection topic of waste classification has become a new hot spot in the world overnight, but long ago, the construction industry was committed to the development of environmental protection. In the recycling of resources, Ding Bo Machine introduced construction waste treatment equipment. Construction waste treatment equipment is mainly used in construction sites, gravel yards, mines and other sites.

Fine sand recycling, high-quality equipment brings high efficiency

At present, with the increase of sewage discharge requirements in the sand and gravel industry, water treatment equipment has become standard. At the same time, river sand mining is restricted in all parts of China, and unqualified sea sand is strictly investigated. The price of high-quality construction sand has risen all the way, and the value of fine sand recovery in mud water has gradually become prominent.      Under the background of sandstone industry improvement and product prices at a high level, the project party's pursuit of equipment quality has been comprehensively improved, and efficient and high-quality equipment is needed to support all aspects of production. Many sandstone companies have gradually recognized high-tech and high-quality belts.来 benefits.      In the past two years, due to the impact of macroeconomic and environmental protection policies, the aggregate industry has been paying more and more attention to the comprehensive utilization of resources and environmental protection issues. The spring of excellent equipment has arrived.     Dingbo Heavy Industry's fine sand recovery machine is a slurry pump that injects mud into a hydrocyclone for separation. The separated coarse particles enter the dewatering screen for dewatering and recycling, and more than 75cm of materials are recovered, which improves resources Utilization rate, realizing greater benefits. Widely used in the washing of materials in mining, building materials, chemical, transportation, concrete mixing stations and other fields. It can be used together with the sand washing machine on the existing production line, or it can be used alone to improve the utilization rate of resources and realize greater benefits. Stable and reliable operation and good economic benefits.    Resources are limited, but technology is unlimited. I believe that in the sand and gravel industry in the future, more and more environmental protection equipment will enter the market, and Red Star Machine will continue to innovate and make its own contribution and strength for the environmental protection cause!

Why should we choose you?

Chose happens because of quality, then price, we can give you bothAdditionally, we can also offer professional products inquiry, products knowledge train(for agents), smooth goods delivery, excellent customer solution proposals.Our service formula: good quality+good price+good service=customer’s trust

How about price?

Yes, we are factory and be able to give you lowest price below market one, and we have a policy that “ for saving time and absolutely honest business attitude, we quote as lowest as possible for any customer, and discount can be given according to quantity”,if you like bargain and factory price is not low enough as you think, just don’t waste your time.Please trust the quotation we would give you, it is professional one.

Guaranteed:

If products’ quality don’t accord to description as we give or the promise before you place order, We promise 100% refund.

How is the quality of your products?

Our products are manufactured strictly according to national and international standard, and we take a test on every grinder before delivered out. If you want see our quality certifications and all kinds of testing report, please just ask us for it.

Q: If i need the complete mineral processing line. is dingbo able to help us build it?

A: Yes, we can help you combine a complete mineral processing line. and give you related professional advices as long as you need.There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service. 

Q: How long is the warrenty of your equipments? Does your company supply the spare parts?

A: The warranty period of dingbo  equipments is one year. And of course we will supply the spare parts for you for life-long time at lowest cost.

Q: Can we send the mineral samples to your company, let your company run the ore-dressing experiment

A: Yes, we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc.

What Information should customers give to us in order to let we provide you with efficient & suitabl

About the FAQ  A:1). What type is the mining? Is it rock stone? or it is sand?    2). If rock stone,What is the general particle size(mm) of the raw ore?    3). What is the handling capacity(tons per hour) you plan to work with?    4).What is the elements of the raw ore? How much percent % of each minerals?